Xerox DocuTech 180 HighLight Color System ユーザーガイド

NOTE:  Production publisher configuration only

The following guides summarize the stacker, stitcher, binder, and 
top tray capabilities.

Stock

Reliable stacking may be 
expected

Less reliable stacking may be 
expected

Suggested alternatives

Size

8 x 10 inches to 9 x 14 
inches (203 x 254 mm to 
229 x 356 mm)

Use the top tray for larger 
sizes

Weight 

Substance 16 to 20 (60 to 
75 g/m2)

Weights outside the limits 
shown are not recommended.

Set or stack 
size

Substance 16 to 20 (60 to 
75 g/m2)

Over substance 20 (75 g/
m2) stock as sets or stacks 
increases the likelihood of 
bindexer jams.

When using copy paper 
heavier than substance 20 (75 
g/m2), limit the stack or set 
size by dividing the set into 
parts. Combine prints when 
completed and finish offline, if 
required. For collated 
unfinished sets, the maximum 
sheet capacity of the bindexer 
can be set to between 50 and 
125.

Stacker 
capacity

Unfinished sheets: 
3300 sheets, substance 
16 (60 g/m2)
3000 sheets, substance 
20 (75 g/m2)
2500 sheets, substance 
24 (90 g/m2)
1875 sheets, substance 
32 (120 g/m2)
1360 sheets, substance 
110 (200 g/m2)

To allow a continuous run, 
unload outer stack before 
inner stack reaches capacity.

Type or 
condition

Xerographic bond paper in 
good condition
Drilled paper

Slightly curled paper

Do not use excessively curled 
paper.
Transparencies must contain 
some opaque sheets to avoid 
finisher jams.
Stock not defined here is 
included in the “Using various 
stocks” section in this guide.