Xerox DocuColor 12 Printer with Matchprint Professional Server ユーザーガイド
Matchprint Professional Server for Xerox DocuColor 12 User Guide
©2002 Kodak Polychrome Graphics. All Rights Reserved.
131
Windows NT or Windows 2000 Client PPD
Two modes of imageable print areas are supported by the Matchprint Professional
Server system, expanded and normal. On initial setup, clients adding printers will
automatically capture the current mode associated with the MPS system. After the
initial setup, if the MPS server administrator switches the imageable print area,
clients will need to delete existing MPS client printers and add new ones. Adding new
printers will reflect the new print area mode.
Server system, expanded and normal. On initial setup, clients adding printers will
automatically capture the current mode associated with the MPS system. After the
initial setup, if the MPS server administrator switches the imageable print area,
clients will need to delete existing MPS client printers and add new ones. Adding new
printers will reflect the new print area mode.
Steps 1-11 are instructions to add a printer on initial Matchprint Professional
Server system setup. Steps 12-22 provide instructions for re-adding a printer once
the imageable print area has been changed.
Server system setup. Steps 12-22 provide instructions for re-adding a printer once
the imageable print area has been changed.
1. At the Matchprint Professional Server, set up the print spooler where the
client machine will print.
Note: When creating a spooler to be used in a mixed Operating System
environment, remember that Windows® 98 require the spooler name to be
environment, remember that Windows® 98 require the spooler name to be
12 characters or less (alpha-numeric characters and spaces are allowed).
2. At the client Windows machine, either log into the same domain as the
Matchprint Professional Server, or connect to the Matchprint Server
with a valid user name and password that has a minimum of read access. For
with a valid user name and password that has a minimum of read access. For
security purposes, KPG does NOT recommend enabling the Guest Account.
Failure to do so will result in Windows 2000 clients receiving the following
error message when trying to print an image: "Could not complete the
print command because the selected printer driver could not be
found. Please select a printer from the control panel and try again."
error message when trying to print an image: "Could not complete the
print command because the selected printer driver could not be
found. Please select a printer from the control panel and try again."
Workgroup Environment Considerations: In a Workgroup environment,
the Matchprint Professional Server must be a member of the same
the Matchprint Professional Server must be a member of the same
workgroup as the client workstations.
3. At the Start button, select Settings, then Printers.
4. Double-click on Add Printer.
5. With the Network printer server selected, click on Next.
6. Using the Add Printer Wizard, browse to the location of the RIP print server
and select the spooler created in step 1.
7. Click OK.
8. Select Yes to have this printer set as your default printer. Click Next. A
message appears saying the printer has been successfully installed.
9. Click on Finish. The printer is now added to your system.
10. Using the Windows client design application, choose Page Setup. Click
Printer and select the spooler name as created in step 1. Note that the
Printer Where location reflects the RIP's spooler pathname. Click OK.
11. Click OK to close the Page Setup dialog box. You are now ready to print.