Black & Decker Quick Set Up Guide 取り扱いマニュアル
Congratulations on your purchase of the Vitessa
™
Iron!
Your Vitessa
™
Advanced Steam Iron features our Even Steam
soleplate design. This soleplate was engineered to provide
a more even flow of steam from heel to tip, enabling you to
quickly tame wrinkles anywhere on your garment
a more even flow of steam from heel to tip, enabling you to
quickly tame wrinkles anywhere on your garment
†
. We hope
you will enjoy the benefits of ironing made easy.
Quick Start Tips:
1.
1.
Fill your water tank.
2. Plug in your iron. The red power light will
illuminate indicating that the iron is heating.
3. Check the garment tag to find the right setting. If
you’re unsure of the proper setting, always start with
low heat.
low heat.
Tip: organize garments from low to high heat for extra time savings.
4. Select the heat and steam level by turning the
SmartSteam
™
dial to the desired setting.
5. Allow the iron to preheat for 2 minutes and then iron
as long as needed.
6. When finished ironing, turn the dial to MIN and
unplug. Allow to completely cool before storing.
7. For easy cord management, loosely wrap the cord
around the heel of the iron and use the clip on the
plug to keep the wrap together.
plug to keep the wrap together.
Note: If the iron is left inactive for for 30 seconds on its
soleplate or sides, or 8 minutes on the heel, it will go
into Auto-Off mode. Simply move the iron and it will
resume heating.
into Auto-Off mode. Simply move the iron and it will
resume heating.
† vs BLACK+DECKER IR08X standard iron with standard soleplate.