Zanussi ZCG43000XA ユーザーズマニュアル

Always turn the flame down or

switch it off before you remove the

pans from the burner.

Lid has safety device, which cuts off the gas

supply for the hob. It works only when the lid is

closed.

Always use the knob for the hob to

switch off a burner. Do not use the

lid as a cut-off device.

Refer to Safety chapters.

Do not put the same pan on two

burners.

Do not put unstable or damaged

pots on the burner to prevent from

spill and injury.

Make sure that pot handles are not

above the front edge of the cooktop.

Make sure that the pots are placed

centrally on the burner in order to

get maximum stability and to get

lower gas consumption.

Use cookware with diameters

applicable to the size of burners.

Rapid

180 - 260

Semi-rapid

120 - 220

Auxiliary

80 - 160

Refer to Safety chapters.

• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface have

no effect on how the hob operates.

• Use a special cleaner applicable for the

surface of the hob.

• Wash stainless steel parts with water, and

then dry them with a soft cloth.

The pan supports are not resistant

to washing in a dishwasher. They

must be washed by hand.

1. Remove the pan supports to easily clean

the hob. 

Be very careful when you

replace the pan supports to

prevent the hob top from

damage.

2. The enamel coating occasionally can have

rough edges, so be careful when you wash

the pan supports by hand and dry them. If