Zanussi ZDH8333P ユーザーズマニュアル

ページ / 16
Problem
Possible solution
 
The laundry is too wet. Spin the laundry in the
washing machine again.
 
Make sure that the room temperature is not too
warm.
The display shows a short programme duration.
Set the Time Drying or the Extra Dry programme.
The display shows Err.
If you want to set a new programme, deactivate
and activate the appliance.
 
Make sure that the options are applicable to the
programme.
The display shows (e.g. E51).
Deactivate and activate the appliance. Start a
new programme. If the problem occurs again,
contact the Service.
1) After maximum 5 hours, the programme ends automatically
If the drying results are not satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The condenser is clogged.
• There was too much laundry in the appliance.
• The drum is dirty.
• Incorrect setting of the conductivity sensor.
• The airflow slots are clogged.
TECHNICAL DATA
Height x Width x Depth
850 x 600 x 600 mm (maximal 680 mm)
Max. depth with the appliance door open
1090 mm
Max. width with the appliance door open
950 mm
Adjustable height
850 mm (+ 15 mm - feet regulation)
Drum volume
118 l
Maximum load volume
8 kg
Voltage
230 - 240 V
Frequency
50 Hz
Necessary fuse
13 A
Total power
950 W
Energy efficiency class
A+
Energy consumption
1)
2,65 kWh
Annual energy consumption
2)
308 kWh
Left—on mode power absorption
0,44 W
Off mode power absorption
0,44 W
14