Zanussi ZWD71463NW ユーザーズマニュアル

First try to find a solution to the problem (refer to

the table). If the problem persists, contact the

Authorised Service Centre.
With some problems, the acoustic signals

code:
•

 - The appliance does not fill with water

properly.

•

 - The appliance does not drain the water.

•

 - The appliance door is open or not

closed correctly. Please check the door!

•

 - The mains supply is unstable. Wait until

the mains supply is stable.

•

 - No communication between electronic

elements of the appliance. Switch off and

switch on again.

WARNING! Deactivate the appliance

before you do the checks.

The programme does not

start.

Make sure that the mains plug is connected to the mains socket.

 

Make sure that the appliance door is closed.

 

Make sure that there is not a damaged fuse in the fuse box.

 

Make sure that the Start/Pause has been pressed.

 

If the delay start is set, cancel the setting or wait for the end of count-

down.

 

Deactivate the Child Lock function if it is on.

The appliance does not fill

with water properly.

Make sure that the water tap is open.

 

Make sure that the pressure of the water supply is not too low. For this

information, contact your local water authority.

 

Make sure that the water tap is not clogged.
Make sure that the filter of the inlet hose and the filter of the valve are

not clogged. Refer to “Care and cleaning”.
Make sure that the inlet hose has no kinks or bends.
Make sure that the connection of the water inlet hose is correct.

The appliance does not fill

with water and drain imme-

diately.

Make sure that the drain hose is in the correct position. The hose may

be too low.

The appliance does not

drain the water.

Make sure that the sink spigot is not clogged.

 

Make sure that the drain hose has no kinks or bends.

 

Make sure that the drain filter is not clogged. Clean the filter, if neces-

sary. Refer to 'Care and cleaning'.

 

Make sure that the connection of the drain hose is correct.