Kärcher K 7 Compact 1.447-002.0 ユーザーズマニュアル

The overflow valve prevents the permissi-
ble working pressure from being exceeded. 
If the lever on the trigger gun is released 
the pressure switch turns off the pump, the 
high pressure jet is stopped. If the lever is 
pulled the pump is turned on again.

These operating instructions describe the 
maximum equipment. Depending on the 
model, there are differences in the scopes 
of delivery (see packaging).
Illustrations on fold-out page!
1 Storage for accessories
2 Transport handle, detachable
3 Quick coupling for high pressure hose
4 Appliance switch "0/OFF“/ „I/ON“
5 Mains cable with mains plug
6 Carrying handle
7 Bearing wheel
8 Water connection
9 Fine filter in the water connection
10 Coupling element for water connection
11 Detergent suction hose (with sieve)
12 Trigger gun
13 Lock trigger gun
14 Key to detach the high pressure hose 

from the trigger gun

15 High pressure hose
16 Spray lance with pressure regulation 

(Vario Power)
Carrying out the most common cleaning 
tasks. The work pressure can be stage-
lessly regulated between "Min" and 
"Max". You can add detergent when 
"Mix" is selected.
In order to adjust the working pressure, 
release the lever of the hand spray gun 
and turn the spray lance to the desired 
position.

17 Spray lance with Dirtblaster

For strong contaminations
———————————————––––

18 Washing brush

Suitable for use with detergents.

19 Delta-Racer D150

The Delta-Racer combines a wash 
brush with a rotating high pressure jet. 
Therefore, it is especially suited for ve-
hicle cleaning or heavily soiled surfac-
es.

20 Foam nozzle with detergent container

With powerful foam for effortless clean-
ing.
———————————————––––

21 Water supply hose

Use a fabric reinforced water hose with 
a commercially available coupling. Min-
imum diameter 13 mm (1/2 inch); mini-
mum length 7.5 m. 

Mount loose parts delivered with appliance 
prior to start-up.
Illustrations on fold-out page!
Illustration 


Screw the coupling element to the wa-
ter connection on the appliance.

Illustration 


Push the high pressure hose into the 
trigger gun until it locks audibly.
Note: Make sure the connection nipple 
is aligned correctly.



Check the secure connection by pulling 
on the high pressure hose.

For connection values, see type plate/tech-
nical data.
Caution
Impurities in the water can damage the 
high-pressure pump and the accessories. 
For protection, the use of the KÄRCHER 
water filter (optional accessory, order no. 
4.730-059) is recommended.

Observe regulations of water supplier.

몇