Saeco HD 8859/01 Exprelia ユーザーズマニュアル
82
ENGLISH
ENERGY SAVING
Stand-by
The Saeco fully automatic espresso coff ee machine is designed for energy
saving, as proven by the Class A energy label.
saving, as proven by the Class A energy label.
After a certain time of inactivity that can be set by the user (see the
“Machine Programming” chapter), the machine turns off automatically. If a
product has been brewed, the machine performs a rinse cycle.
In stand-by mode, the energy consumption is below 1Wh.
“Machine Programming” chapter), the machine turns off automatically. If a
product has been brewed, the machine performs a rinse cycle.
In stand-by mode, the energy consumption is below 1Wh.
To turn on the machine, press the “
” button (if the power button on the
back of the machine is set to “I”). If the boiler is cold, the machine performs
a rinse cycle.
a rinse cycle.
The machine status can be manually changed to stand-by mode by keep-
ing the STAND-BY button pressed for 3 seconds.
ing the STAND-BY button pressed for 3 seconds.
Note:
1
The machine will not go into stand-by mode if the service door is open.
2
When the stand-by mode is activated, the machine may perform a
rinse cycle. The cycle can be interrupted by pressing the “STOP” button.
The machine can be reactivated by:
1
Pressing any button on the control panel.
2
Opening the service door (when closing the door, the machine goes
back to stand-by mode).
The red indicator light on the “
” button fl ashes when the machine is in
stand-by mode.
Screen Saver
The machine comes with a screen saver extending the life of the display.
After 5 minutes of inactivity, the machine logo will start fl oating.
When this occurs, the machine is active and pressing any button will imme-
diately activate all functions.
After 5 minutes of inactivity, the machine logo will start fl oating.
When this occurs, the machine is active and pressing any button will imme-
diately activate all functions.
Note:
The screen saver will not be activated if there is an ongoing warning signal.