Toshiba RAS-13 N3KVR-E/RAS-13 N3AVR-E DAISEIKAI ユーザーズマニュアル

Press 

FIX

 : Move the louver in the 

desired vertical direction.

Press 

SWING

 : Swing the air 

automatically and press again to stop.

For horizontal direction, adjust manually.

1.  Open the air inlet grille and remove the air filters.
2.  Attach the filters. (see detail in the accessory sheet).

1. Remove the slide cover.
2. Insert 2 new batteries (AAA type) 

following the (+) and (–) positions.

1. Push 

 by tip of the pencil.

  If timer indication is flashing, go to the next step 2.

2. Press 

 or 

 : adjust the time.

3. Press 

 : Set the time.

Push 

 by tip of the pencil or

1. Remove the batteries.

2. Press 

.

3. Insert the batteries.

 •  Do not move the louver manually by others.
 •  The louver may automation positioning by some operation mode.

 •  The provided Remote Controller is a wireless type, which also can be used as 
  a wire. Please see “How to Connect The Remote Controller for Wired 
  Operation”, located in installation instruction, in case of wired control is required.
 •  In wire operation, remote controller will return to initial condition (PRESET, 
  TIMER and CLOCK will return to initial condition) when user shutdown power 
  supply of Air conditioner.

1   Infrared signal emitter
2   Start/Stop button
3   Mode select button (MODE)
4   Temperature button (TEMP)
5   Fan speed button (FAN)
6   Swing louver button (SWING)
7   Set louver button (FIX)
8   On timer button (ON)
9   Off timer button (OFF)
!   Setup button (SET)
"   Clear button (CLR)
#   Memory and Preset button (PRESET)
$  One-Touch button (ONE-TOUCH)
%   High power button (Hi-POWER)
&   Economy button (ECO)
(   Quiet button (QUIET)
)   Comfort sleep button (COMFORT SLEEP)
~   Plasma Air Purifier button (PURE)
+   Filter reset button (FILTER)
,   Set clock button (CLOCK)
-   Check button (CHECK)
.   Reset button (RESET)

Press the “ONE-TOUCH” button for fully automated operation that is customized 
to the typical consumer preferences in your region of the world. The customized 
settings control temperature air flow strength, air flow direction and other settings 
to provide you alternate contact with “ONE-TOUCH” of the button. If you prefer 
other settings you can select from the many other operating functions of your 
Toshiba unit.

 Press 

ONE-TOUCH

 : Start the operation.

To automatically select cooling, heating or fan only operation

1.  Press 

MODE

 : Select A.

2.  Press 

 : Set the desired temperature.

3.   Press 

FAN

 : Select AUTO, LOW  , LOW+ 

, MED 

, MED+ 

, or 

HIGH 

.

1.  Press 

MODE

 : Select Cool 

, Heat 

, or Fan only 

.

2.  Press 

 : Set the desired temperature.

  Cooling: Min. 17°C, Heating: Max. 30°C, Fan Only: No temperature indication

3.  Press 

FAN

 : Select AUTO, LOW  , LOW+ 

, MED 

, MED+ 

, 

or HIGH 

.

For dehumidification, a moderate cooling performance is controlled automatically.

 1. 

Press 

MODE

 : Select Dry 

.

 2. 

Press 

 : Set the desired temperature.

To automatically control room temperature and airflow for faster cooling or heating 
operation (except in DRY and FAN ONLY mode)

Press 

Hi POWER

 : Start and stop the operation.

Press 

PURE

 to start and stop plasma air purifier and air ionizer operation.

The plasma air purifier and air ionizer can be activated or deactivated by pressing the 
PURE button. The air ionizer starts in conjunction with plasma air purifier operation.

Note:  The FILTER indicator (orange) turns on after PURE operation is performed

 

  for about 1000 hours.

In case of the misplaced or discharged remote control

•  Pressing the RESET button, the unit can start or  
  stop without using the remote control.
•   Operation mode is set on AUTOMATIC operation,  
  preset temperature is 25°C and fan operation is  
 automatic 

speed.

Set the timer when the air conditioner is operating.

1  Press 

 : Set the desired 

ON timer.

Press 

 : Set the desired OFF 

timer.

Press 

 : Set the timer. 

Press 

 : Set the timer.

Press 

 : Cancel the timer.

Press 

 : Cancel the timer.

To automatically control room to save energy (except in DRY and FAN ONLY mode)

 

Press 

 : 

Start and stop the operation.

Note:  Cooling operation; the set temperature will increase automatically 1 degree/    

hour for 2 hours (maximum 2 degrees increase). For heating operation the 
set temperature will decrease.

SWING

FAN

PURE

FIX

QUIET

Hi POWER

ONE-TOUCH

COMFORT

SLEEP

4

5

!
.

"

%

(

8

1

2

$

)
-

&

~

#

3

,

7

6

+

9

EN

ES

FR

IT

DE

PT

PL

CZ

RU

CR

HU

TR

NL

GR

SV

FI

NO

DK

RO

BG

EE

LV

SK

SI

TSB 1110650191 (01_EN).indd   3

TSB 1110650191 (01_EN).indd   3

7/31/12   3:54 PM

7/31/12   3:54 PM