Cisco Cisco PVC300 Pan Tilt Optical Zoom Internet Camera メンテナンスマニュアル
Accessing the PVC300 PTZ Internet Camera
Configuring Port Forwarding Rules
Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE
26
3
Configuring Port Forwarding Rules
There are some additional configuration settings to make in order
For 2-way audio over the Internet to work on your PVC300 camera, you need to
configure additional settings, as shown in the example in the following diagram.
configure additional settings, as shown in the example in the following diagram.
Cameras accessed over the Internet that require 2-way audio must use a unique
RTSP port. Routers with Port Address Translation should map the same external
port as used on the inside LAN network.
RTSP port. Routers with Port Address Translation should map the same external
port as used on the inside LAN network.
In the above example, PVC300 #2 external <wan-ip>:8554 maps to internal
<lan-ip>:8554. Consult your network administrator for alternative port
suggestions. Port# 8554 is designated as an alternate RTSP port by the Internet
Assigned Numbers Authority (IANA).
<lan-ip>:8554. Consult your network administrator for alternative port
suggestions. Port# 8554 is designated as an alternate RTSP port by the Internet
Assigned Numbers Authority (IANA).
NOTE:
2-way audio is not supported in HTTP
mode under Client Settings.