Cisco Cisco Catalyst 6500 Series 7600 Series Wireless Services Module (WiSM) トラブルシューティングガイド
Contents
Introduction
Prerequisites
Requirements
Components Used
Overview of Service Port
Standalone Controllers
Service Port Features
Same subnet (service port vlan) reachability
Remote subnet (different than service port vlan) reachability
Configure
Verify
Service Port in AP SSO mode
WiSM Controllers
Configure
Verify
Troubleshoot
Introduction
This document describes the configuration and theory of operation of servie ports in Cisco Unified
Wireless Network Controllers (CUWN) and provides general guidelines for its deployment.The
purpose of this document is to:
Wireless Network Controllers (CUWN) and provides general guidelines for its deployment.The
purpose of this document is to:
Provide an overview and best practices guidelines to connect Cisco standalone Controllers
(55000/8500) to the network
(55000/8500) to the network
●
Provide an overview , best practices and commands to troubleshoot service port issues in
Wireless Service Module/Controllers (WiSM)
Wireless Service Module/Controllers (WiSM)
●
Prerequisites
Requirements
Cisco recommends you have knowledge of Cisco Wireless LAN Controllers
Components Used
The information in this document is based on Cisco Wireless Standalone Controlers and WiSM
modules.
modules.
The information in this document is created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.