Cisco Cisco Expressway メンテナンスマニュアル
Field
Description
Usage tips
Encryption
The encryption to use for the
connection to the Cisco TMSPE
service.
connection to the Cisco TMSPE
service.
Off: no encryption is used.
TLS: TLS encryption is used.
Default is TLS.
A TLS connection is recommended.
Verify certificate Controls whether the certificate
presented by the Cisco TMSPE
service is verified against the
Expressway's current trusted CA
list and, if loaded, the revocation
list. Default is Yes.
service is verified against the
Expressway's current trusted CA
list and, if loaded, the revocation
list. Default is Yes.
If you enable verification:
■
IIS (on the Cisco TMSPE server) must be installed
with a signed certificate and be set to enforce SSL
connections.
with a signed certificate and be set to enforce SSL
connections.
■
You must add the certificate of the issuer of the
Cisco TMSPE server's certificate to the file
containing the Expressway's trusted CA
certificates. This is done from the
Cisco TMSPE server's certificate to the file
containing the Expressway's trusted CA
certificates. This is done from the
(Maintenance > Security certificates > Trusted
CA certificate).
CA certificate).
Check
certificate
hostname
certificate
hostname
Controls whether the hostname
contained within the certificate
presented by the Cisco TMSPE
service is verified by the
Expressway. Default is Yes.
contained within the certificate
presented by the Cisco TMSPE
service is verified by the
Expressway. Default is Yes.
If enabled, the certificate hostname (also known as the
Common Name) must match the specified Server
address. If the server address is an IP address, the
required hostname is obtained via a DNS lookup.
Common Name) must match the specified Server
address. If the server address is an IP address, the
required hostname is obtained via a DNS lookup.
This only applies if Verify certificate is Yes.
Base group
The ID used to identify this
Expressway (or Expressway
cluster) with the Cisco TMSPE
service.
Expressway (or Expressway
cluster) with the Cisco TMSPE
service.
The TMS administrator will supply this value.
The Base group ID used by the Devices service must be
explicitly specified as it is normally different from that
used by the other services.
explicitly specified as it is normally different from that
used by the other services.
Authentication
username and
password
username and
password
The username and corresponding
password used by the Expressway
to authenticate itself with the
Cisco TMSPE service.
password used by the Expressway
to authenticate itself with the
Cisco TMSPE service.
If TLS encryption is not enabled, the authentication
password is sent in the clear.
password is sent in the clear.
Service-specific configuration
You can specify the connection details for each of the Cisco TMSPE services: Users, FindMe, Phone books and
Devices.
Devices.
Connect to this
service
service
Controls whether the Expressway
connects to the Cisco TMSPE
service. Default is No.
connects to the Cisco TMSPE
service. Default is No.
If enabled, the status of the connection is shown to the
right of the field; this can be either Checking, Active or
Failed. Click
right of the field; this can be either Checking, Active or
Failed. Click
to view full status information.
50
Cisco Expressway Administrator Guide
Network and System Settings