Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) トラブルシューティングガイド

Note: You can also place the cursor on the card graphic in CTC to view a dialog box. This display
identifies the card as:

XC or XCVT: Active

♦ 

XC or XCVT: Standby

♦ 

Physically replace the standby XC or XCVT card on the ONS 15454 with an XC10G card. In order to
do so, complete these steps:

Open the XC or XCVT card ejectors.

a. 

Slide the card out of the slot. This raises the IMPROPRMVL alarm, which clears when the
standby XC 10G card reloads.

b. 

Open the ejectors on the XC10G card.

c. 

Slide the X10G card into the slot along the guide rails.

d. 

Close the ejectors.

The fail LED above the ACT/STBY LED becomes red, blinks for several seconds, and turns
off. The ACT/STBY LED turns amber, and remains lit.

e. 

3. 

Choose the Maintenance > XC Cards tabs in the Node view.

4.