Cisco Cisco Expressway
Figure 2 Expressway-C
Figure 3 Expressway-E
Task 3: Configuring DNS
System Host Name
The System host name defines the DNS hostname that this system is known by. Note that this is not the fully-qualified
domain name, just the host label portion.
domain name, just the host label portion.
Note that <System host name>.<Domain name> = FQDN of this Expressway.
To configure the System host name:
1.
Go to System > DNS.
2.
Configure the System host name as follows:
Expressway-C
Expressway-E
System host name
Enter expc
Enter expe
3.
Click Save.
Domain Name
The Domain name is the name to append to an unqualified host name before querying the DNS server.
To configure the Domain name:
1.
Go to System > DNS.
2.
Configure the Domain name as follows:
Expressway-C
Expressway-E
Domain name
Enter internal-domain.net
Enter example.com
3.
Click Save.
DNS Servers
The DNS server addresses are the IP addresses of up to 5 domain name servers to use when resolving domain names.
You must specify at least one default DNS server to be queried for address resolution if you want to either:
You must specify at least one default DNS server to be queried for address resolution if you want to either:
8
Cisco Expressway-E and Expressway-C - Basic Configuration Deployment Guide