Cisco Cisco UCS C22 M3 Rack Server 白書

ページ / 116
Oracle RAC Built on FlexPod 
 
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. 
Page 58 of 116 
N1KV_FLEXPOD(config)# port-profile type ethernet vMotion_Uplink  
N1KV_FLEXPOD(config)# vmware port-group 
N1KV_FLEXPOD(config-port-prof)# switchport mode trunk 
N1KV_FLEXPOD(config-port-prof)# switchport trunk allowed vlan 761 
N1KV_FLEXPOD(config-port-prof)# mtu 9000 
N1KV_FLEXPOD(config-port-prof)# channel-group auto mode on mac-pinning 
N1KV_FLEXPOD(config-port-prof)# no shutdown 
N1KV_FLEXPOD(config-port-prof)# system vlan 761 
N1KV_FLEXPOD(config-port-prof)#state enabled 
 
N1KV_FLEXPOD(config)# port-profile type ethernet Backup_Uplink  
N1KV_FLEXPOD(config)# vmware port-group 
N1KV_FLEXPOD(config-port-prof)# switchport mode trunk 
N1KV_FLEXPOD(config-port-prof)# switchport trunk allowed vlan 762 
N1KV_FLEXPOD(config-port-prof)# mtu 9000 
N1KV_FLEXPOD(config-port-prof)# channel-group auto mode on mac-pinning 
N1KV_FLEXPOD(config-port-prof)# no shutdown 
N1KV_FLEXPOD(config-port-prof)# system vlan 762 
N1KV_FLEXPOD(config-port-prof)#state enabled
 
5.  Run the following commands to create the storage, private, vMotion, and backup virtual Ethernet 
communications port profile.  
N1KV_FLEXPOD(config)# port-profile type vethernet Storage1 
N1KV_FLEXPOD(config-port-prof)# vmware port-group 
N1KV_FLEXPOD(config-port-prof)# switchport mode access 
N1KV_FLEXPOD(config-port-prof)# switchport access vlan 192 
N1KV_FLEXPOD(config-port-prof)# service  policy type qos input platinum_Cos_5 
N1KV_FLEXPOD(config-port-prof)# no sh 
N1KV_FLEXPOD(config-port-prof)# system vlan 192 
N1KV_FLEXPOD(config-port-prof)#state enabled 
 
N1KV_FLEXPOD(config)# port-profile type vethernet Storage2 
N1KV_FLEXPOD(config-port-prof)# vmware port-group 
N1KV_FLEXPOD(config-port-prof)# switchport mode access 
N1KV_FLEXPOD(config-port-prof)# switchport access vlan 193 
N1KV_FLEXPOD(config-port-prof)# service  policy type qos input platinum_Cos_5