Cisco Cisco Unified MeetingPlace Audio Server メンテナンスマニュアル
3-39
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 3 Installing the 8112 Server
Connecting the system cables
Figure 3-28 Back of Server (Mixed System with 480 E1 and 480 IP Ports)
T1 CAS/IP system
To connect the telephony cables in a T1 CAS/IP system, follow these steps:
Step 1
Locate the following Cisco Systems-supplied items:
•
IP LAN cables
•
T1 CAS telephony cables
Step 2
Plug one end of the first Cisco Systems-supplied T1 CAS telephony cable into the customer-provided
socket.
socket.
Step 3
Plug the other end of the first Cisco Systems-supplied T1 CAS telephony cable into the T1 Smart Blade
transition module in the back of the server. The first T1 CAS telephony cable should be placed in the top
most connector slot. The second T1 CAS telephony cable should be placed in the next connector slot
moving down, and so on. A maximum of four T1 CAS telephony cables can be connected to any one T1
Smart Blade transition module.
transition module in the back of the server. The first T1 CAS telephony cable should be placed in the top
most connector slot. The second T1 CAS telephony cable should be placed in the next connector slot
moving down, and so on. A maximum of four T1 CAS telephony cables can be connected to any one T1
Smart Blade transition module.
Step 4
Repeat steps 2 and 3 until all the T1 CAS telephony cables are connected.
Step 5
Install tie wraps and label the T1 CAS telephony cables as needed.
Step 6
Plug the IP LAN cable into the customer-supplied RJ-48c socket.