Cisco Cisco Unified MeetingPlace Audio Server インストールガイド
4-4 Database planning
Cisco MeetingPlace Audio Server Installation Planning Guide
February 27, 2004
For example, you can assign the following:
•
Meeting access to one block of numbers to reserve those numbers for
callers who only want to attend a meeting
callers who only want to attend a meeting
•
Profile access to a third block for callers with profiles
•
Combined access to a fourth block for all callers
If MeetingPlace receives dialed number information, you must decide how
many numbers to reserve for each use. If MeetingPlace does not receive
dialed number information, the configuration information you provide for
each port determines the port access types.
many numbers to reserve for each use. If MeetingPlace does not receive
dialed number information, the configuration information you provide for
each port determines the port access types.
Creating port groups
To configure multiple ports at one time, organize ports into port groups. The
configuration information you enter for the port group, which includes a port
access type, applies by default to all ports assigned to the group in the absence
of either individual port configuration information or a DID/DNIS access
plan.
configuration information you enter for the port group, which includes a port
access type, applies by default to all ports assigned to the group in the absence
of either individual port configuration information or a DID/DNIS access
plan.
Keep the following points in mind:
•
Port groups are optional, although a port must belong to a port group to be
used for outdial.
used for outdial.
•
Default port groups are assigned as follows:
Configuring individual ports
Some configuration information for individual ports is included in a port
group definition. Unless you want different information for an individual port
than for the group, you only provide this information for the group. Individual
port information takes precedence over port group information.
group definition. Unless you want different information for an individual port
than for the group, you only provide this information for the group. Individual
port information takes precedence over port group information.
Port configuration information includes a port access type. When
MeetingPlace receives dialed number information, the DID/DNIS access plan
determines which type is assigned to a call. If, however, the system cannot use
the DID/DNIS or DDI information it receives from the network (for example,
MeetingPlace receives dialed number information, the DID/DNIS access plan
determines which type is assigned to a call. If, however, the system cannot use
the DID/DNIS or DDI information it receives from the network (for example,
MeetingPlace can receive both DDI/DNIS and ANI/CLI (the European equivalent of
ANI) when it is connected to the telephone network through E1 PRI trunks.
ANI) when it is connected to the telephone network through E1 PRI trunks.
Port group
For
0
PSTN
1
IP
2
E1
3
T1 PRI
Country
Telephony access
European Union