Cisco Cisco Unified MeetingPlace Audio Server インストールガイド
Telephony and LAN planning 3-21
February 27, 2004
Cisco MeetingPlace Audio Server Installation Planning Guide
RJ-45
The following figures describe pinout for the RJ-45 connector. The cable and
plug must be shielded types to ensure EMC compliance.
plug must be shielded types to ensure EMC compliance.
The following table is a pinout diagram for the RJ-45 connector.
Blade command IP configuration
Before configuring IP blades, customers must know whether they are using
the IP Precedence mechanism or the DSCP mechanism. They will then need
to provide specific settings for these. The following sections describe each
mechanism and describe the various settings.
the IP Precedence mechanism or the DSCP mechanism. They will then need
to provide specific settings for these. The following sections describe each
mechanism and describe the various settings.
For more information about blade command IP configuration, including jitter
buffer configuration, see the Cisco MeetingPlace Audio Server 5.2 Customer
Engineer Guide.
buffer configuration, see the Cisco MeetingPlace Audio Server 5.2 Customer
Engineer Guide.
Pin
Signal
Function
Direction
1
LRT
Receive +ve (tip)
Input
2
LRR
Receive –ve (ring)
Input
4
LTT
Transmit +ve (tip)
Output
5
LRT
Transmit –ve (ring)
Output
Amphenol cable
RJ-45 cables
connected to T1
connected to T1