Cisco Cisco 1 GHz GainMaker Amplifier インストールガイド
Installing the Housing
3 Position the housing in the pedestal frame as shown in the following illustration.
Line up the self-tapping bolt holes on the bottom of the housing with the
mounting holes on the bracket.
Note: The housing mounts to the bracket provided by the pedestal manufacturer.
4 Secure the housing to the bracket by using the bolts that you removed in step 2.
Use the strand clamps as spacers if necessary. Torque the bolts from 8 ft-lb to 10
ft-lb (10.8 Nm to 13.6 Nm).
5 Connect the coaxial cable to the pin connector according to connector
manufacturer specifications.
6 Proceed to
Installing Accessories (on page 32).
OL-31156-01
31