Cisco Cisco 1 GHz GainMaker Amplifier インストールガイド
Preparing for Forward Path Balancing
Position 1 - Selects thermal setup mode
Position 2 - Selects manual setup mode
Position 3 - Selects AGC operational mode
Note: AGC operational mode is used only after the station has been initially balanced
in either thermal or manual setup mode.
Bode Network
The Bode Network, or Bode, is an interstage variable attenuation and slope network
The Bode Network, or Bode, is an interstage variable attenuation and slope network
whose loss characteristics are driven by DC control voltage.
The position of switch S1 sets the DC control voltage driving the Bode according to
The position of switch S1 sets the DC control voltage driving the Bode according to
the setup mode or operational mode required for the station.
Refer to the following table for more information on choosing the correct switch
Refer to the following table for more information on choosing the correct switch
position for your application.
Note: Consult your system technical supervisor or manager for more information
Note: Consult your system technical supervisor or manager for more information
about which choice of setup mode to use, as this may be dictated by your system or
corporate engineering policy.
OL-31156-01
47