Cisco Cisco 10 Gigabit Modules 情報ガイド
Product End-of-Life Notice
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 1
End-of-Sale and End-of-Life Announcement for the Cisco Multirate
10GBASE-ER and OC-192/STM-64 IR-2 XFP Module for SMF (XFP-
10GER-OC192IR)
10GBASE-ER and OC-192/STM-64 IR-2 XFP Module for SMF (XFP-
10GER-OC192IR)
EOL6902
Cisco announces the end-of-sale and end-of life dates for the Cisco Multirate 10GBASE-ER and OC-
192/STM-64 IR-2 XFP Module for SMF (XFP-10GER-OC192IR). The last day to order the affected
product(s) is April 20, 2010. Customers with active service contracts will continue to receive support from
the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes
the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part
numbers affected by this announcement. For customers with active and paid service and support
contracts, support will be available until the termination date of the contract, even if this date exceeds the
Last Date of Support shown in Table 1.
Table 1.
End-of-Life Milestones and Dates for the Cisco Multirate 10GBASE-ER and OC-192/STM-64 IR-2 XFP Module for
SMF (XFP-10GER-OC192IR)
Milestone
Definition
Date
End-of-Life
Announcement Date
Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed
to the general public.
to the general public.
October 20, 2009
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no
longer for sale after this date.
longer for sale after this date.
April 20, 2010
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers.
Actual ship date is dependent on lead time.
Actual ship date is dependent on lead time.
July 19, 2010
End of Routine Failure
Analysis Date: HW
Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of
product failure or defect.
product failure or defect.
April 20, 2011
End of New Service
Attachment Date: HW
Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last
date to order a new service-and-support contract or add the equipment and/or software to an
existing service-and-support contract.
date to order a new service-and-support contract or add the equipment and/or software to an
existing service-and-support contract.
April 20, 2011
End of Service Contract
Renewal Date: HW
Renewal Date: HW
The last date to extend or renew a service contract for the product.
July 16, 2014
Last Date of Support:
HW
HW
The last date to receive service and support for the product. After this date, all support services
for the product are unavailable, and the product becomes obsolete.
for the product are unavailable, and the product becomes obsolete.
April 19, 2015
HW = Hardware
OS SW = Operating System Software App. SW = Application Software
Table 2.
Product Part Numbers Affected by This Announcement
End-of-Sale Product
Part Number
Part Number
Product Description
Replacement
Product Part Number
Product Part Number
Replacement Product Description
Additional Information
XFP-10GER-OC192IR
10GBASE-ER and OC192
IR2 XFP Module
IR2 XFP Module
XFP-10GER-192IR+
Cisco Multirate 10GBASE-ER and
OC-192/STM-64 IR-2 XFP Module
OC-192/STM-64 IR-2 XFP Module
--
XFP-10GER-OC192IR=
10GBASE-ER and OC192
IR2 XFP Module
IR2 XFP Module
XFP-10GER-192IR+=
Cisco Multirate 10GBASE-ER and
OC-192/STM-64 IR-2 XFP Module
OC-192/STM-64 IR-2 XFP Module
--
Product Migration Options
Customers are encouraged to migrate to the Cisco Multirate Single-Mode Intermediate-Reach 10-Gigabit XFP
Transceiver Module with product identification number XFP-10GER-192IR+. This product has the same functionality
as the module XFP-10GER-OC192IR,and it is backward compatible with the software releases supported by XFP-