Cisco Cisco C880 M4 Server インストールガイド
SET0600000
6 Adding a Disk Unit (DU)
This chapter describes the procedure for adding a disk unit (DU).
In this chapter, DU represents a disk unit.
IOU represents both IOU_1GbE and IOU_10GbE.
This procedure include the procedure for adding a SAS array controller and a flash backup unit into
a DU.
See Chapter 7. Adding an IOU
SET0601000
6.1 Conditions for Adding Components
Table 6.1 lists connections between IOUs and DUs.
DU#-Slot# shows the mounting location of SAS array controller cards inside of DU.
However, when adding only 1 SAS array controller card inside of a DU, connect to HDD#0 to #3.
In addition, a DU installed into a partition which IOU installed.
Table 6.1
IOU
mounting
location
DU
maunting
location
Connected HDD mounting location
SAS array contoroller catds
2 cards
1 card
IOU#0
DU#0-Slot#0
DU#0-HDD#2,#3
DU#0-HDD#0,#1,#2,#3
IOU#1
DU#0-Slot#1
DU#0-HDD#0,#1
IOU#2
DU#1-Slot#0
DU#1-HDD#2,#3
DU#1-HDD#0,#1,#2,#3
IOU#3
DU#1-Slot#1
DU#1-HDD#0,#1
SET0601010
6.1.1 Number of mounted DUs
The maximum number of disk units for all main unit model type is 2 units.
SET0601020
6.1.2 Conditions concerning combined use of DUs
- There are no conditions concerning the combined use of DUs
33
CA92344-0577-01