Cisco Cisco C880 M4 Server インストールガイド

ページ / 132
SET0702000 
7.2  Procedure for Adding an IOUs 
 
SET0702010 
7.2.1 Checking the delivered items 
 
(1) Check the delivered items by confirming the following. 
1. The types and quantities of delivered options match those written on the order sheet. 
2. The delivered items match those listed in the List of Accessories. 
3. All cabinets are free of any abnormalities such as scratches, dents, or dirt. 
4. The specifications and version level of units delivered separately due to delivery considerations 
are available for the target functions. 
 
 
SET0702020 
7.2.2 Mounting the adding options 
 
Use the following steps to mount the added options. 
 
 
ANNT)  Confirm the quantities and installation locations with a system administrator. 
 
ANNT)  If you start the work with the main unit powered off, turn on the AC power and mount the added 
options. 
 
(1) Connect the FST. See Appendix B.2.1, "FST Setup and Connection 
"
(2) Login to the Web-UI. 
Table 7.2.2 lists the values to be set to log in to Web-UI. 
See Appendix B.3.1, "Logi
"
Table 7.2.2 
Item 
Setting values 
URL 
http://<Maintenance IP Address>:<http port#> or   
https://<Maintenance IP Address>:<https port#> 
 
This depends on the system configuration. 
http port#:Default(8081) 
https port#:Default(432) 
Username 
Account username 
Password 
Account password 
 
(3) Enter Maintenance Mode.   
See Appendix B.1.1, "Enabling maintenance Mode 
"
(4) Confirm the quantities and installation locations. 
(5) Prepare the IOU. 
(6) If installing a PCI Express card, change the PCI Express brackets depending on your situation.   
PCI Express brackets and screws are attached items. See Figure 7.2.2. 
See Appendix C.6.1, "Installing the PCI Express card 
"
 
 
37 
CA92344-0577-01