Cisco Cisco 2600 3600 Series 1-Port 30-Channel J1 Voice Fax Network Module 技術マニュアル
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these E&M VICs:
VIC-2E/M
●
VIC2-2E/M
●
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a
cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Conventions
.
Product Numbers
VIC-2E/MTwo-port E&M VIC
●
VIC2-2E/MTwo-port E&M VIC*
●
Note: * VIC2 indicates a next-generation VIC, with component refresh. VIC-2E/M is not supported in the Cisco IP Communications Voice/Fax
Network Modules (NM-HD-1V, NM-HD-2V and NM-HD-2VE). VIC2-2E/M should be used with them. Refer to the
Network Modules (NM-HD-1V, NM-HD-2V and NM-HD-2VE). VIC2-2E/M should be used with them. Refer to the
Features
VIC-2E/M
Feature
Description
Voice ports
Two E&M ports
Cisco - Understanding E&M Voice Interface Cards
http://kbase:8000/paws/servlet/ViewFile/7937/2em_vic.xml?convertPaths=1 (2 of 9) [1/24/2006 10:25:34 AM]