Cisco Cisco MGX-FRSM-HS2 B Serial Frame Service Module 技術マニュアル
Cisco Wireless Devices Association Matrix
Document ID: 19242
In order to get Cisco Aironet drivers, firmware and utility software, refer
to Cisco Wireless Downloads.
to Cisco Wireless Downloads.
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Bridges and Autonomous APs Association Matrix
Use the Matrix
Matrix and Legend
Wireless Mesh Hardware Association
Mesh Hardware − Association Table
LWAPP APs Association
Related Information
Prerequisites
Requirements
Components Used
Conventions
Bridges and Autonomous APs Association Matrix
Use the Matrix
Matrix and Legend
Wireless Mesh Hardware Association
Mesh Hardware − Association Table
LWAPP APs Association
Related Information
Introduction
When you design or operate a wireless LAN (WLAN), consider the hardware components capacity to form an
association with other elements of the network. This document describes in simple format the association
capabilities of each Cisco wireless component.
association with other elements of the network. This document describes in simple format the association
capabilities of each Cisco wireless component.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is applicable to all Cisco wireless hardware and software versions.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Bridges and Autonomous APs Association Matrix
The 802.11 association process allows an AP to map a logical port or association identifier (AID) to the
wireless station. The association process is initiated by the wireless station with an association request frame
containing the capability information of the client and completed by the AP in an association response frame.
The association response indicates success or failure as well as a reason code.
wireless station. The association process is initiated by the wireless station with an association request frame
containing the capability information of the client and completed by the AP in an association response frame.
The association response indicates success or failure as well as a reason code.