Cisco Cisco HDT Network Storage Hard Drive Trays 管理者ガイド

Hard Disk Drive LEDs

Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide

157

The LAN LED shows the status of the Ethernet link. These are the LED colors and 
their meanings:

•

Solid Green: The LAN link is up and running at 1000 link speed, but is 
currently idle.

•

Flickering Green: The LAN link is up and running at 1000 link speed and is 
currently active. The LED flickers off with activity.

•

Solid Yellow: The LAN link is up and running at 10/100 link speed, but is 
currently idle.

•

Flickering Yellow: The LAN link is up and running at 10/100 link speed and 
is currently active. The LED flickers off with activity.

•

Off: No LAN link is detected.

These LEDs shows the disk-drive activity, the error conditions, and locate statte of 
the .installed disk drives. 

The green LED indicates drive activity. These are the LED colors and their 
meanings.

•

Solid Green: The disk drive is configured but is currently idle.

•

Flickering Green: The disk drive is configured, active, and not rebuilding. 
Flickers off with activity.

•

Blinking Green: The disk drive is configured and a RAID array is currently 
rebuilding to the disk drive.

•

Off: The disk drive is not configured (not part of a RAID or JBOD array and 
not exported).

The red LED means that the drive is in an error condition. These are the LED colors 
and their meanings

•

Solid Red: The drive is in a failed state.

•

Blinking Red: The drive is predicated to fail (via S.M.A.R.T.). We recommend 
that you replace the drive to avoid the loss of data.