Cisco Cisco Unified MeetingPlace Video Integration クイック設定ガイド
Quick Start Configuration: Cisco Unified MeetingPlace Basic Voice and Video Conferencing
Verifying Basic Voice and Video Conferencing Using the End-User Web Interface
4
f.
If you have multiple video endpoints in the meeting, then verify that the video participants can see
each other.
each other.
Step 12
Select User Groups or User Profiles, depending on whether you want to configure a user group or an
individual user profile.
individual user profile.
Step 13
Select Edit or Add New, depending on whether you want to configure an existing or a new user group
or user profile.
or user profile.
Note
If you want to enable dial-out privileges for guest users, then edit the guest user profile.
Step 14
to Yes.
Step 15
Verify that you can dial out from the voice meeting:
a.
While in the voice meeting, press #3 to dial out to another phone or video endpoint.
b.
Follow the voice prompts to connect the other phone or video endpoint to the meeting.
c.
If you have multiple video endpoints in the meeting, then verify that the video participants can see
each other.
each other.
Step 16
Hang up all phones and video endpoints.
Troubleshooting Tips
If the dial-out call fails:
•
Make sure that the phone line is not in use when the system tries to call you.
•
Make sure that you can successfully call the dialed-out number from another phone.
•
Make sure that the phone number you enter uses the same format that you would use to dial the
phone number from an office phone. For example, if you only need to dial the last four digits to reach
other office phones, then enter only four digits for an office phone. Similarly, if you enter your
personal cell phone number, then you might need to include a 9 and the complete telephone number
with area code.
phone number from an office phone. For example, if you only need to dial the last four digits to reach
other office phones, then enter only four digits for an office phone. Similarly, if you enter your
personal cell phone number, then you might need to include a 9 and the complete telephone number
with area code.
•
For additional troubleshooting help, see these modules:
–
–
–
What to Do Next
To enable web conferencing, proceed to the
module.
Verifying Basic Voice and Video Conferencing Using the
End-User Web Interface
End-User Web Interface
Use this procedure to verify the basic configuration for voice and video conferencing, e-mail
notifications, and dial-out calls.
notifications, and dial-out calls.