Cisco Acano X-series
Cisco Meeting Server Release 2.0+ : H.323 Gateway Deployment Guide
37
Command/Examples
Description/Notes
h323_gateway h323_
domain_strip <yes/no>
domain_strip <yes/no>
If set to "yes" and "h323_gateway h323_domain" is set, when a SIP call is made
to the gateway the <h323_domain> will be stripped from the destination address
(if present) before making the H.323 call.
to the gateway the <h323_domain> will be stripped from the destination address
(if present) before making the H.323 call.
h323_gateway h323_
interfaces <interface
list>
interfaces <interface
list>
h323_gateway sip_
interfaces <interface
list>
interfaces <interface
list>
Must be configured in order for the gateway to start, but the actual setting is
currently ignored.
currently ignored.
h323_gateway sip_port
<port>
<port>
Ports for the SIP side to listen on. The default is 6061.
Note: if you wish to change the default port from 6061, and if the H.323 Gateway
and Call Bridge are on the same server, make sure you avoid port 5061 which is
used by the Call Bridge. Changes do not take place until the gateway is restarted.
and Call Bridge are on the same server, make sure you avoid port 5061 which is
used by the Call Bridge. Changes do not take place until the gateway is restarted.
The H.323 Gateway always expects TLS connections; therefore, "Encrypted"
should be selected on outbound dial plan rules on the Call Bridge
should be selected on outbound dial plan rules on the Call Bridge
h323_gateway sip_proxy
<uri>
<uri>
Set this to the IP address of the Call Bridge, or for multiple Call Bridges use the
domain name (through DNS). All incoming H.323 calls will be directed to this uri
domain name (through DNS). All incoming H.323 calls will be directed to this uri
h323_gateway restrict_
codecs <yes/no>
codecs <yes/no>
If set to yes, the H.323 Gateway is limited to a safe set of codecs that are less
likely to cause interoperability problems. Currently this set is
G.711/G.722/G.728/H.261/H.263/ H.263+/H.264.
likely to cause interoperability problems. Currently this set is
G.711/G.722/G.728/H.261/H.263/ H.263+/H.264.
Codecs disabled by this feature are G.722.1 and AAC.
h323_gateway disable_
content <yes/no>
content <yes/no>
If set to yes, H.239 content is disabled.
h323_gateway trace_
level <level>
level <level>
Provides additional logging to aid troubleshooting by Cisco support. You may be
asked to provide traces for levels 0, 1, 2 or 3.
asked to provide traces for levels 0, 1, 2 or 3.
Appendix D H.323 Gateway MMP commands