Cisco Acano X-series 開発者ガイド
Cisco Meeting Server Release 2.0 : MMP Command Line Reference
45
Command/Examples
Description/Notes
h323_gateway h323_domain_strip
<yes/no>
<yes/no>
If set to "yes" and "h323_gateway h323_domain" is set, when
a SIP call is made to the gateway the @<h323_domain> will be
stripped from the destination address (if present) before making
the H.323 call.
a SIP call is made to the gateway the @<h323_domain> will be
stripped from the destination address (if present) before making
the H.323 call.
h323_gateway h323_interfaces
<interface list>
<interface list>
h323_gateway sip_interfaces
<interface list>
<interface list>
Must be configured in order for gateway to start, but the actual
setting is currently ignored.
setting is currently ignored.
h323_gateway sip_port <port>
Ports for the SIP side to listen on. The default is 6061.
Note: if you wish to change the default port from 6061, and if
the H.323 Gateway and Call Bridge are on the same server,
make sure you avoid port 5061 which is used by the Call Bridge.
Changes do not take place until the gateway is restarted.
The H.323 Gateway always expects TLS connections;
therefore, "Encrypted" should be selected on outbound dial
plan rules on the Call Bridge
Note: if you wish to change the default port from 6061, and if
the H.323 Gateway and Call Bridge are on the same server,
make sure you avoid port 5061 which is used by the Call Bridge.
Changes do not take place until the gateway is restarted.
The H.323 Gateway always expects TLS connections;
therefore, "Encrypted" should be selected on outbound dial
plan rules on the Call Bridge
h323_gateway sip_proxy <uri>
Set this to the IP address of the Call Bridge, or for multiple Call
Bridges use the domain name (through DNS). All incoming
H.323 calls will be directed to this uri
Bridges use the domain name (through DNS). All incoming
H.323 calls will be directed to this uri
If the Call Bridge and the H.323 Gateway are on the same host
then use IP address 127.0.0.1. If the Call Bridge and the H.323
Gateway are on different hosts then use the IP address of the
Call Bridge.
then use IP address 127.0.0.1. If the Call Bridge and the H.323
Gateway are on different hosts then use the IP address of the
Call Bridge.
h323_gateway restrict_codecs
<yes/no>
<yes/no>
If set to yes, the H.323 Gateway is limited to a safe set of
codecs that are less likely to cause interoperability problems.
Currently this set is G.711/G.722/G.728/H.261/H.263/
H.263+/H.264.
codecs that are less likely to cause interoperability problems.
Currently this set is G.711/G.722/G.728/H.261/H.263/
H.263+/H.264.
Codecs disabled by this feature are G.722.1 and AAC.
h323_gateway disable_content
<yes/no>
<yes/no>
If set to yes, H.239 content is disabled.
h323_gateway trace_level <level>
Provides additional logging to aid troubleshooting by Cisco
support. You may be asked to provide traces for levels 0, 1, 2 or
3.
support. You may be asked to provide traces for levels 0, 1, 2 or
3.
9 H.323 Commands