HP ProLiant DL360 470065-357 ユーザーズマニュアル
製品コード
470065-357
System Unit
System Unit
System Unit
System Unit
Dimensions
Dimensions
Dimensions
Dimensions (H x W x D)
(with bezel)
(with bezel)
1.70 x 16.78 x 27.25 in (4.32 x 42.62 x 69.22 cm)
Weight
Weight
Weight
Weight
(approximate)
(approximate)
Maximum
(all hard drives, power
supplies, and processors
installed)
(all hard drives, power
supplies, and processors
installed)
39.5 lb (17.92 kg)
Minimum
(one hard drive, power
supply, and processor
installed)
(one hard drive, power
supply, and processor
installed)
32 lb (14.51 kg)
Input Requirements
Input Requirements
Input Requirements
Input Requirements
(for Standard 460W PSU,
see power specifications
tables for detail on 460W,
750W and 1200W power
supplies)
(for Standard 460W PSU,
see power specifications
tables for detail on 460W,
750W and 1200W power
supplies)
Rated Line Voltage
100 to 240 VAC
Rated Input Current
4.5 Amps (at 120VAC) to 2.2 Amps (at 240
VAC)
VAC)
Rated Input Frequency
50 to 60 Hz
BTU Rating
BTU Rating
BTU Rating
BTU Rating
Maximum
1773 BTU / hr (at 120 VAC), 1715 (at 240
VAC)
VAC)
Power Specifications
Power Specifications
Power Specifications
Power Specifications
To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at URL:
available via the online tool located at URL:
- Click on the system of interest. Example: DL360 G7
- Follow the instructions of the next screens.
- Follow the instructions of the next screens.
Power Supply Output
Power Supply Output
Power Supply Output
Power Supply Output
(per power supply)
(per power supply)
Rated Steady-State Power 460 W (at 100 VAC),
460 W (at 200 VAC)
Maximum Peak Power
460 W (at 100 VAC),
460 W (at 200 VAC)
460 W (at 200 VAC)
NOTE:
NOTE:
NOTE:
NOTE: See Power Supply Specifications tables
for complete details on 460W PSU and optional
750W and 1200W Power Supply Options.
for complete details on 460W PSU and optional
750W and 1200W Power Supply Options.
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature Operating
10° to 35° C (50° to 95° F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°
F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10° C/hr (18° F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 30° C (86° F).
altitude derating of 1.0°C per every 305 m (1.8°
F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10° C/hr (18° F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 30° C (86° F).
Non-operating
-30° to 60° C (-22° to 140° F). Maximum rate of
change is 20° C/hr (36° F/hr).
change is 20° C/hr (36° F/hr).
Relative Humidity
Relative Humidity
Relative Humidity
Relative Humidity
(non-condensing)
(non-condensing)
Operating
10 to 90% relative humidity (Rh), 28° C (82.4° F)
maximum wet bulb temperature, non-
condensing.
maximum wet bulb temperature, non-
condensing.
QuickSpecs
HP ProLiant DL360 Generation 7 (G7)
HP ProLiant DL360 Generation 7 (G7)
HP ProLiant DL360 Generation 7 (G7)
HP ProLiant DL360 Generation 7 (G7)
Technical Specifications
DA - 13598 Worldwide — Version 41 — November 14, 2011
Page 53