Cisco Headend System Release 2.7 インストールガイド
Reinstall the NMI Software (Optional)
4023737 Rev C
107
Reinstall the NMI Software (Optional)
If you are using NMI software and removed it as part of the upgrade, you need to
reinstall the NMI software now. Complete the following steps to reinstall the NMI
software.
1 If necessary, open an xterm window on the DNCS.
2 Complete the following steps to log on to the xterm window as root user.
reinstall the NMI software now. Complete the following steps to reinstall the NMI
software.
1 If necessary, open an xterm window on the DNCS.
2 Complete the following steps to log on to the xterm window as root user.
a Type su - and press Enter. The password prompt appears.
b Type the root password and press Enter.
b Type the root password and press Enter.
3 Type pkginfo -l | grep SAInmi and then press Enter. The system lists the
SAInmi package if it is installed.
4 Is SAInmi installed?
If yes, go to step 5.
If no, you do not have NMI loaded onto your system. Skip the rest of this
procedure.
procedure.
5 Close any user interfaces that may be open on the DNCS.
Note: If the DNCS has any open user interfaces, you will be unable to remove
the NMI software.
the NMI software.
6 Type ps -ef | grep ui and then press Enter. The system displays a list of user
interface processes that may still be running.
7 On a sheet of paper, write down the process IDs (PIDs) of any user interface
process that is still running.
8 Type kill -9 [PID] and then press Enter for any user interface process that is still
running. The system stops the user interface processes.
9 To reinstall the NMI software, refer to DBDS Alarm Manager 1.0 Installation
Instructions (part number 745262) and follow the Install the NMI Software
Directly Onto the DNCS procedure.
Directly Onto the DNCS procedure.