Cisco Headend System Release 2.5 インストールガイド
Chapter 1 Initial Installation of RNCS Software
56
4022447 Rev B
Starting the RNCS
After installing and configuring the RNCS software and setting up the remote sites,
you are now ready to start the server. Complete the following steps to start the
server.
1 Open an xterm window on the DNCS.
2 Type siteCmd [hostname] lionnStart and press Enter.
you are now ready to start the server. Complete the following steps to start the
server.
1 Open an xterm window on the DNCS.
2 Type siteCmd [hostname] lionnStart and press Enter.
Note: Do not type the brackets [ ] in the command.
3 In the xterm window on the DNCS, type siteCmd [hostname] lionnControl and
press Enter. The lionnControl utility window opens.
Note: Do not type the brackets [ ] in the command.
Note: Do not type the brackets [ ] in the command.
4 Select 2 and press Enter to view all process elements.
5 Select x and press Enter to return to the main menu of the lionnControl utility
5 Select x and press Enter to return to the main menu of the lionnControl utility
window.
6 Select 1 and press Enter to stop all processes.
Note: Wait until the Curr Stt (Current State) of all processes shows that they
have stopped.
have stopped.
7 Select 2 and press Enter to start all processes.
Note: Wait until the Curr Stt (Current State) of all processes shows that they are
running.
running.
8 Follow the on-screen instructions to exit from the lionnControl utility.