Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch
6
Release Notes for 200, 300, 500, and ESW2 Series Switches Firmware Version 1.2.9
Release Notes
To determine which version of hardware you are using, click Status > System
Summary. Look at the lower portion of the screen under the graphic
representation of the switch for the PID VID. The descriptor will end in the VID
number. The version information is also shown on the product label on the back of
the switch. The PID VID is located at the bottom of the label.
Summary. Look at the lower portion of the screen under the graphic
representation of the switch for the PID VID. The descriptor will end in the VID
number. The version information is also shown on the product label on the back of
the switch. The PID VID is located at the bottom of the label.
Sx300 in Firmware 1.1.x
and above.
HW VID=02
and above.
HW VID=02
16K
4K
1K
Sx500, SG500X and ESW2 switches have a single version of HW, see the
admin guide for details.
admin guide for details.
V1 versus V2 Hardware
Total Number
of MAC
Addresses
of MAC
Addresses
Total Number
of Active
VLANs
of Active
VLANs
Total Number
of Multicast
Groups
of Multicast
Groups