Cisco Cisco Agent Desktop 9.0 インストールガイド
Cisco CAD Installation Guide
86
August 4, 2014
SNMP Configuration
The SNMP Configuration step appears only if you are running the CAD Configuration
Setup utility again to change configuration settings and if the Simple Network
Management Protocol (SNMP) service is installed on the server that hosts the CAD
base services.
Setup utility again to change configuration settings and if the Simple Network
Management Protocol (SNMP) service is installed on the server that hosts the CAD
base services.
SNMP allows you to monitor and manage a network from a single workstation or
several workstations, called SNMP managers. SNMP is actually a family of
specifications that provide a means for collecting network management data from the
devices residing in a network. It also provides a method for those devices to report any
problems they are experiencing to the management station.
several workstations, called SNMP managers. SNMP is actually a family of
specifications that provide a means for collecting network management data from the
devices residing in a network. It also provides a method for those devices to report any
problems they are experiencing to the management station.
When CAD is not running on a PG, configure the Microsoft SNMP service.
When CAD is running on a PG, Cisco SNMP Agent Management service must be
enabled and the Microsoft SNMP service must be disabled. The Microsoft SNMP
service and the Cisco SNMP Agent Management service cannot simultaneously be
enabled.
enabled and the Microsoft SNMP service must be disabled. The Microsoft SNMP
service and the Cisco SNMP Agent Management service cannot simultaneously be
enabled.
For more information on installing the Microsoft SNMP service and the Cisco SNMP
Agent Management service, see
Agent Management service, see