Cisco Cisco Web Security Appliance S170 ユーザーガイド

(Optional) Connect the appliance to data traffic either directly or through a transparent redirection 
device:

P1/P2

P1 only:

Enable "Restrict M1 port to 
appliance management services 
only”.

Connect P1 and M1 to different 
subnets.

Use a duplex cable to connect 
P1 the internal network and the 
internet to receive both inbound 
and outbound traffic.

P1 and P2

Enable P1.

Connect M1, P1, and P2 to 
different subnets.

Connect P2 to the internet to 
receive inbound internet traffic.

After running the System Setup 
Wizard, enable P2.

Device: WCCP v2 router:

For Layer 2 redirection, physically 
connect router to P1/P2.

For Layer 3 redirection, be aware of 
possible performance issues with 
Generic Routing Encapsulation.

Create a WCCP Service on the 
Appliance.

Device: Layer-4 Switch:

For Layer 2 redirection, physically 
connect switch to P1/P2.

For Layer 3 redirection, be aware of 
possible performance issues with 
Generic Routing Encapsulation.

The appliance does not support 
inline mode.

M1 (optional)

If "Restrict M1 port to appliance 
management services only” is 
disabled, M1 is the default port for 
data traffic. 

N/A