HP ProLiant DL180 G6 470065-370 ユーザーズマニュアル

(P/N: 516471-B21) is required to enable RAID 6, 6+0
NOTE:

NOTE:

NOTE:

NOTE: To achieve highest possible stated transfer rate please make sure the firmware on the drive bays
(backplanes) and HP Smart Array controller up to date. Latest firmware are available to download from
HP support web site.
NOTE:

NOTE:

NOTE:

NOTE: All Hard drive bay options except 4LFF require HP Smart Array P410 or P212 controller. NOTE:
Full Height/ Full Length Riser Option is not available when the Rear 2LFF drive bays is selected for the
system.

Internal Storage Devices

Internal Storage Devices

Internal Storage Devices

Internal Storage Devices

Diskette Drives

Via USB only

Optical Drives
One of the following
depending on Model

Optional HP Slim SATA DVD-ROM Optical Drive

Optional HP Slim SATA DVD RW Optical Drive

NOTE:

NOTE:

NOTE:

NOTE: Support in 4, 8, and 12 drive models. Optical drives can only be
installed in 12 drive model and 25SFF drive bay system with rear option kit
(P/N 515826-B21).

Drive Bays
One of the following
depending on Model

Up to 14 Hot Plug SAS/SATA 3.5" drives

Up to 25 Hot Plug SAS/SATA 2.5" drives

NOTE:

NOTE:

NOTE:

NOTE: 4 Drive Models are Non-Hot Pluggable. Smart Array Controller must
be added for Hot Plug drive capability. 4 Drive Models can be upgraded
with the addition of a Smart Array Controller and a SAS/SATA Multi-lane
cable (496013-B21).
NOTE:

NOTE:

NOTE:

NOTE: The addition of a Smart Array Controller requires the addition of a
SAS/SATA Multi-lane cable (P/N 496013-B21).

Maximum Internal

Maximum Internal

Maximum Internal

Maximum Internal
Storage

Storage

Storage

Storage
One of the following
depending on Model

Hot Plug 3.5" SATA

28.0TB (14 x 2TB)

Hot Plug 3.5" SAS

28.0TB (14 x 2TB)

Hot Plug 2.5" SATA

25.0TB (25 x 1.0TB)

Hot Plug 2.5" SAS

25.0TB (25 x 1.0TB)

Interfaces

Interfaces

Interfaces

Interfaces

Network RJ-45 (Ethernet)

2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights Out
100i Remote Management)

Serial

1

Graphics

1

USB

5 total ports: (2) front, (2) rear, (1) optional internal

NOTE:

NOTE:

NOTE:

NOTE: In order to connect a USB device internally, the internal USB Cable
G6 Kit must be used (P/N 536769-B21).
NOTE:

NOTE:

NOTE:

NOTE: Please see the following URL for additional information regarding
USB support:

HP ProLiant DL180 Generation 6 (G6)

HP ProLiant DL180 Generation 6 (G6)

HP ProLiant DL180 Generation 6 (G6)

HP ProLiant DL180 Generation 6 (G6)

DA - 13248   North America — Version 35 — May 19, 2011

Page 5