Cisco Cisco 3G Wireless WAN High-Speed WAN Interface Card 情報ガイド
Q&A
Q.
A.
I have a host connected to a Cisco Catalyst
®
2950 Switch connected to the router. I am
unable to bring up the cellular interface automatically after the router reboot. I rebooted
the router several times and the cellular interface did not come out of the "spoofing
mode" by itself. The Dynamic Multipoint VPN (DMVPN) tunnels are down after the router
reboot. The data traffic from my laptop should take the cellular interface out of spoofing
mode. I have to ping the tunnel hub router IP address from my laptop to bring up the
cellular interface and the DMVPN tunnels. I have to do it every time I reboot the 3G
HWIC router.
Verify to ensure that:
Verify to ensure that:
●
The IP address on the tunnel interface is static
●
The access list used for dialer group has the headend tunnel interface IP address
The default route should not be configured through the cellular interface; it should be over the
tunnel interface. The tunnel traffic is routed through the cellular interface and would in turn
trigger call setup.
tunnel interface. The tunnel traffic is routed through the cellular interface and would in turn
trigger call setup.
Printed in USA
C67-436652-00 12/07
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 19 of 19