Cisco Cisco uBR-MC3GX60V Broadband Processing Engine 入門ガイド

ページ / 2
Cisco uBR-MC3G60V Broadband Processing Engine for the 
Cisco uBR10012 Universal Broadband Router
At-A-Glance
© 2010 Cisco Systems, Inc. All rights reserved. Cisco, the Cisco logo, and Cisco Systems are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website 
are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0805R) This document is Cisco public Information.  
Product Overview
The Cisco® uBR-MC3GX60V Broadband Processing Engine (BPE) is a high-capacity, 
DOCSIS® 3.0-capable line card for the Cisco uBR10012 Universal Broadband Router. 
With 72 DOCSIS downstream and 60 upstream channels per card, the uBR-MC3GX60V 
BPE sets a new benchmark for scalable, faster, and cost-effective DOCSIS 3.0 cable 
modem termination system (CMTS) solutions. With the addition of the uBR-MC3GX60V 
BPE, the Cisco uBR10012 platform scales to an industry-leading 
576 modular 
DOCSIS downstream channels and 480 upstream channels, or approximately 24 
Gbps of downstream throughput and 14.4 Gbps of upstream throughput, in a single, 
carrier-class chassis. 
The Cisco uBR10012 CMTS with the uBR-MC3GX60V BPE delivers 10 times the 
capacity and 20 times the speed of DOCSIS 2.0 solutions at only a tenth of the cost. 
Because it bonds 24 DOCSIS channels (or 18 EuroDOCSIS channels) per bonding 
group, the solution allows cable operators to deliver ultra-broadband services with 
maximum downstream speeds approaching 1.0 Gbps per subscriber. A fully loaded 
Cisco uBR10012 CMTS with the Cisco uBR-MC3GX60V BPE can deliver 500 HDTV 
channels, video-on-demand (VoD), and ultra-broadband services to 20,000 homes.
 
Extending the Cisco DOCSIS 3.0 Solution 
The Cisco uBR10012 CMTS and uBR-MC3GX60V BPE are part of the Cisco DOCSIS 
3.0 solution portfolio. The uBR10012 supports both of the CableLabs-specified CMTS 
architectures – integrated and modular – in the same chassis. In this way, the uBR10012 
provides a broad range of configuration options, allowing cable operators to select the 
CMTS design that best meets their specific requirements. The addition of the Cisco 
uBR-MC3GX60V BPE to the solution portfolio adds exceptional scalability while signifi-
cantly reducing the per-channel cost of the CMTS. 
The combination of the Cisco uBR10012 CMTS equipped with the uBR-MC3GX60V 
BPE and the Cisco RFGW-10 Universal Edge QAM provides impressive capacity 
while maintaining the highest standards of reliability and availability because of com-
prehensive line card and supervisor redundancy on both platforms. In addition, this 
solution enables cable operators to converge their IP and digital video services on the 
RFGW-10, thereby lowering the cost per QAM channel and reducing the rack space, 
power, cooling and other environmental requirements for delivering all services.
 
Figure 1  Cisco DOCSIS 3.0 Solution with Cisco uBR-MC3GX60V
The standards-based modular solution also permits cable operators to utilize  
third-party edge QAM products that comply with the CableLabs M-CMTS  
specifications.
 
Delivering Cost-Effective Video Over DOCSIS 
To enable the transition to an all-IP network, including managed and unmanaged IP 
video services, the Cisco DOCSIS 3.0 solution provides a highly scalable, highly  
available converged network optimized for video. Cisco IOS® software offers a  
comprehensive feature set for efficient IP video delivery over the DOCSIS network. 
High Quality: Advanced QoS features such as dynamic bandwidth sharing and 
admission control for bandwidth reservation to ensure video quality and enable 
convergence with high-speed data services.