Cisco Cisco IOS Software Release 12.0(13)S7
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
MPLS Safe Label Reuse After Router Restart
First Published: June 30, 2006
Last Updated: June 30, 2006
Last Updated: June 30, 2006
The MPLS Safe Label Reuse After Router Restart feature provides the means to preserve information
about the state of Multiprotocol Label Switching (MPLS) label usage during normal router operation
across a router restart. This ensures that the router avoids reusing labels that were in use before the restart
until it is safe to do so. The MPLS Safe Label Reuse After Router Restart feature provides a more secure
network by preventing network traffic from being forwarded incorrectly during the short period
following router restart.
about the state of Multiprotocol Label Switching (MPLS) label usage during normal router operation
across a router restart. This ensures that the router avoids reusing labels that were in use before the restart
until it is safe to do so. The MPLS Safe Label Reuse After Router Restart feature provides a more secure
network by preventing network traffic from being forwarded incorrectly during the short period
following router restart.
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module. To reach
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
.
Finding Support Information for Platforms and Cisco IOS Software Images
http://www.cisco.com/go/cfn
. An account on Cisco.com is not required.
Contents
•
•
•
•
•
•