Cisco Cisco Content Security Management Appliance M1070 ユーザーガイド
10-4
AsyncOS 8.1 for Cisco Content Security Management User Guide
Chapter 10 Monitoring System Status
•
File transfer failure: A connection was established between the Email Security appliance and the
Security Management appliance, but the data transfer failed.
Security Management appliance, but the data transfer failed.
The data transfer status for Web Security appliances can be one of the following values:
•
Not enabled: The centralized configuration manager is not enabled for the Web Security appliance.
•
Never connected: The centralized configuration manager is enabled for the Web Security appliance,
but no connection has been established between the Web Security appliance and the Security
Management appliance.
but no connection has been established between the Web Security appliance and the Security
Management appliance.
•
Waiting for data: The Web Security appliance has connected to the Security Management
appliance, which is waiting to receive data.
appliance, which is waiting to receive data.
•
Connected and transferred data: A connection was established between the Web Security
appliance and the Security Management appliance, and data were successfully transferred.
appliance and the Security Management appliance, and data were successfully transferred.
•
Configuration push failure: The Security Management appliance attempted to push a
configuration file to the Web Security appliance, but the transfer failed.
configuration file to the Web Security appliance, but the transfer failed.
•
Configuration push pending: The Security Management appliance is in the process of pushing a
configuration file to the Web Security appliance.
configuration file to the Web Security appliance.
•
Configuration push success: The Security Management appliance successfully pushed a
configuration file to the Web Security appliance.
configuration file to the Web Security appliance.
Data transfer issues can reflect temporary network problems or appliance configuration issues. The
statuses of “Never connected” and “Waiting for data” are normal, transient statuses when you first add
a managed appliance to the Security Management appliance. If the status does not eventually change to
“Connected and transferred data,” then the data transfer status might indicate a configuration issue.
statuses of “Never connected” and “Waiting for data” are normal, transient statuses when you first add
a managed appliance to the Security Management appliance. If the status does not eventually change to
“Connected and transferred data,” then the data transfer status might indicate a configuration issue.
If the “File transfer failure” status appears for an appliance, monitor the appliance to determine if the
failure was caused by a network issue or by a problem with the appliance configuration. If no network
issues prevent data transfer and the status does not change to “Connected and transferred data,” then you
might need to change the appliance configuration to enable data transfer.
failure was caused by a network issue or by a problem with the appliance configuration. If no network
issues prevent data transfer and the status does not change to “Connected and transferred data,” then you
might need to change the appliance configuration to enable data transfer.
Viewing the Configuration Status of Your Managed Appliances
On the Security Management appliance, choose Management Appliance > Centralized Services >
Security Appliances.
Security Appliances.