Cisco Cisco IOS Software Release 12.0(8)S 白書
tunnel mode mpls traffic-eng
86
Cisco IOS Release 12.0(8)S
tunnel mode mpls traffic-eng
To set the mode of a tunnel to MPLS for traffic engineering, use the tunnel mode mpls traffic-eng
command. To disable this feature, use the no form of this command.
command. To disable this feature, use the no form of this command.
tunnel mode mpls traffic-eng [gre-ip]
no tunnel mode mpls traffic-eng [gre-ip]
no tunnel mode mpls traffic-eng [gre-ip]
Syntax Description
Default
No default behavior or values.
Command Mode
Interface configuration
Command History
Usage Guidelines
This command specifies that the tunnel interface is for an MPLS traffic engineering tunnel, and
enables the various tunnel MPLS configuration options.
enables the various tunnel MPLS configuration options.
Related Commands
gre-ip
(Optional)
Release
Modification
12.0(5)S
This command was introduced.
Command Description
tunnel mpls traffic-eng affinity
Configures tunnel affinity (the properties the tunnel requires
in its links).
in its links).
tunnel mpls traffic-eng autoroute announce
Instructs the IGP to use the tunnel in its enhanced SPF
calculation (if the tunnel is up).
calculation (if the tunnel is up).
tunnel mpls traffic-eng bandwidth
Configures bandwidth required for an MPLS traffic
engineering tunnel.
engineering tunnel.
tunnel mpls traffic-eng path-option
Configures a path option.
tunnel mpls traffic-eng priority
Configures setup and reservation priority for a tunnel.