Cisco Cisco MDS 9000 NX-OS Software Release 5.2
32
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8h)
Limitations and Restrictions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cisco DCNM compatibility with Cisco MDS NX-OS Release 5.2(8h)
Cisco Prime DCNM support for Cisco MDS NX-OS Release 5.2(8h) starts from Cisco Prime DCNM
Release 7.2(1). Using releases earlier than Cisco Prime DCNM Release 7.2(1) with Cisco MDS NX-OS
Release 5.2(8h) causes authentication failure. See
Release 7.2(1). Using releases earlier than Cisco Prime DCNM Release 7.2(1) with Cisco MDS NX-OS
Release 5.2(8h) causes authentication failure. See
for more information.
SME Quorum
You cannot change the quorum or the SME master node during a master key rekey. If a change occurs
during the smart card portion of the operation, the master key rekey operation will fail and must be
repeated from the beginning.
during the smart card portion of the operation, the master key rekey operation will fail and must be
repeated from the beginning.
OUI Mismatch for SME Tape Targets
If Cisco DCNM does not discover all expected tape targets, check the sme.log to identify an OUI
mismatch. Look for a message like the following:
mismatch. Look for a message like the following:
2012.04.09 21:15:50 WARN [SME] skipped target 50:06:0b:00:00:b8:e4:b0 due to explicit
type mismatch. Expect: 240 found: 228. If this is an error update your OUI definitions
To correct this issue, manually add the OUI definitions to the server.properties file. The format is as
follows:
follows:
# 0xhhhhhh vendor_name devicetypes h(host)|d(disk)|t(tape)|s(switch)|g(gateway)|m(cisco
mds)