Cisco Cisco IOS Software Release 12.0 S

Platform: Cisco 12000 series

The Modular QoS CLI allows users to specify a traffic class independently of QoS policies.

The Modular QoS CLI is used to configure QoS. The Modular QoS CLI contains the following three 
steps:

Defining a traffic class with the class-map command

Creating a service policy by associating the traffic class with one or more QoS policies (using the 
policy-map command)

Attaching the service policy to the interface with the service-policy command

see the following document for further information:

Platforms: Cisco 7200 series, Cisco 7500/RSP series, Cisco 12000 series

The NetFlow ToS-Based Router Aggregation feature provides the ability to enable limited router-based 
Type of Service (ToS) aggregation of NetFlow export data. This results in summarized NetFlow Export 
data to be exported to a collection device, resulting in lower bandwidth requirements for NetFlow Export 
data and reduced platform requirements for NetFlow data collection devices. The NetFlow ToS Based 
Router Aggregation feature introduces support for six aggregation schemes that include the ToS byte as 
a field:

::AS-ToS aggregation scheme

::Protocol-Port-ToS aggregation scheme

::SourcePrefix-ToS aggregation scheme

::DestinationPrefix-ToS aggregation scheme

::Prefix-ToS aggregation scheme

::Prefix-Port aggregation scheme

Platform: Cisco 7200 series, Cisco 7500 series

The OSPF Stub Router Advertisement feature allows you to bring a new router into a network without 
immediately routing traffic through the new router and allows you to gracefully shut down or reload a 
router without dropping packets that are destined for other networks. This feature introduces three 
configuration options that allow you to configure a router that is running the Open Shortest Path First 
(OSPF) protocol to advertise a maximum or infinite metric to all neighbors. 

For more information about the OSPF Stub Router Advertisement feature, see the Cisco document at the 
following location: