Cisco Cisco IOS Software Releases 12.2 MC 集約されたデータ
Product Bulletin
All contents are Copyright © 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 5
New Cisco IOS Software Release 12.2(40)EX1 Supporting
the Catalyst Blade Switches 3130 and 3032 for Dell and
3120 for HP
the Catalyst Blade Switches 3130 and 3032 for Dell and
3120 for HP
PB447597
Cisco
®
announces Cisco IOS
®
software release supporting Catalyst Blade Switch 3130
and 3032 for Dell Servers and the Catalyst Blade Switch 3120 for Hewlett Packard (HP)
Servers. This release furthers Cisco leadership by providing integrated services for layer
2 and layer 3 networks, quality of service, integrated security, and manageability for
enterprise deployments.
The following is an overview of features available with Cisco IOS software:
●
The blade switch is capable of layer 3 unicast and multicast forwarding including IPv4
routing with EIGRP, OSPF, BGP and RIP for IPv4 and IPv6. Multicast protocols include
Protocol Independent Multicast (PIM) Sparse Mode, Dense Mode and Source Specific
Multicast (SSM) support. Internet Group Management Protocol (IGMP) and Multicast
Listener Discovery (MLD) snooping is also available for host connectivity to the multicast
network. Virtualization of the network is provided with VPN routing/forwarding (VRF)-Lite.
●
Intelligent Quality of Service (QOS) will keep everything flowing smoothly. Industry-leading
mechanisms for marking, classification, and scheduling deliver superior performance for
data, voice, and video traffic, all at wire speed.
●
Comprehensive layer 2 local area network (LAN) features including 802.1d Spanning Tree
Protocol, IEEE 802.1s Multiple Spanning Tree (MSTP), IEEE 802.1w Rapid Spanning Tree
(RSTP) and Rapid per VLAN Spanning Tree (PVST+). High availability and connectivity
with EtherChannel, FlexLinks, Hot Standby Router Protocol (HSRP), VLAN Trunk Protocol
(VTPv2), UniDirectional Link Detection (UDLD), and more.
●
A set of management and control features are available including: Cisco IOS Software CLI,
Generic On-Line Diagnostic (GOLD), On-board failure logging (OBFL), Switch Port
Analyzer (SPAN) to remotely monitor ports, enhanced traffic management monitoring, and
analysis, using the embedded remote Monitoring (RMON), Simple Network Management
Protocol (SNMP) and SYSLOG protocols. Network management tools such as Cisco Works
LMS and Cisco Network Assistant Software, PC-based tools for quick configuration based
on preset templates are available. Another ease of use feature is Cisco Smart Port macros
to generate and reduce time to setup and administer IOS configurations.
●
The Catalyst Blade Switch supports a complete set of security features for connectivity and
access control, including ACLs, authentication, port-level security, and identity based
network services with 802.1x and extensions. Key features include DHCP snooping,
Dynamic ARP Inspection, IP source guard, Private VLANs. IEEE 802.1x and other
authentication methods such as Web Authentication and MAC Auth Bypass (MAB) are
included.