Cisco Cisco IOS Software Release 12.4(11)T

The following example shows sample debug output for maximum and utilized circuit capacity 
information for each trunk:

Router# show gatekeeper circuits

                      CIRCUIT INFORMATION

                      ===================

Circuit       Endpoint   Max Calls Avail Calls Resources     Zone

-------       --------   --------- ----------- ---------     ----

XYZ

              Total Endpoints: 2

              TGW-1

                                                    23        16          Available

              TGW-2

                                                    46        31          Available

Use the debug gatekeeper dns 10 command to verify domain name server information found on the 
gatekeeper.

To display all information related to the load balancing, the debug gatekeeper dns 10 command 
must be enabled before the debug gatekeeper endpoint 10 command.

Use the

 

 

command

 

to verify that endpoint capacities are updated.

Use the debug gatekeeper gup asn1 command in a cluster scenario to verify that the new 
Gatekeeper Update Protocol (GUP) asn1 resourceUpdateIndication is used for updating the capacity 
of trunks or carries between the gatekeepers in the gatekeeper cluster.

Use the debug gatekeeper main 10 command to verify that the routing information used by the 
gatekeeper

.

Use the debug h225 asn1 command to display the GUP events or Abstract Syntax Notation 1 
(ASN.1) details.

For examples of show and debug command output and details on interpreting the output, see the 
following resources:

Cisco IOS Debug Command Reference, Release 12.4T