Cisco Cisco IOS Software Release 12.4(2)XB6 テクニカルリファレンス
39
cdma pdsn cluster controller session-high
cdma pdsn cluster controller session-high
To generate an alarm when the controller reaches the upper threshold of the maximum number of
sessions it can handle, use the cdma pdsn cluster member session-high command. To disable this
feature, use the no form of this command.
sessions it can handle, use the cdma pdsn cluster member session-high command. To disable this
feature, use the no form of this command.
cdma pdsn cluster controller session-high 1-1000000
no cdma pdsn cluster controller session-high 1-1000000
Syntax Description
Defaults
The range is 1-1000000. The configured value should be more than the lower threshold value. The
default value is 200000.
default value is 200000.
Command Modes
Global configuration
Command History
Usage Guidelines
You should take into account the number of members in the cluster when you configure the high
threshold. For example, if there are only 2 members in the cluster, the high threshold should be less than
40000.
threshold. For example, if there are only 2 members in the cluster, the high threshold should be less than
40000.
Examples
The following example illustrates the cdma pdsn cluster controller session-high command:
Received SNMPv1 Trap:
Community: public
Enterprise: cCdmaPdsnMIBNotifPrefix
Agent-addr: 9.15.72.15
Enterprise Specific trap.
Enterprise Specific trap: 8
Time Ticks: 9333960
cCdmaServiceAffectedLevel.0 = major(3)
cCdmaClusterSessHighThreshold.0 = 50
1-1000000
The threshold of the maximum number of sessions the controller can
handle.
handle.
Release
Modification
12.2(8)ZB1
This command was introduced.