Cisco Cisco IOS Software Release 12.4(2)XB6 テクニカルリファレンス
47
cdma pdsn failure-history
cdma pdsn failure-history
To configure CDMA PDSN SNMP session failure history size, use the cdma pdsn failure-history
command in global configuration mode. To return to the default length of time, use the no form of this
command.
command in global configuration mode. To return to the default length of time, use the no form of this
command.
cdma pdsn failure-history entries
no cdma pdsn failure-history
Syntax Description
Defaults
No default behavior or values.
Command Modes
Global configuration
Command History
Examples
The following example specifies that 1000 is the maximum number of entries that can be recorded in the
SNMP session table:
SNMP session table:
cdma pdsn failure-history 1000
Related Commands
entries
Maximum number of entries that can be recorded in the SNMP session
failure table. Possible values are 0 through 2000.
failure table. Possible values are 0 through 2000.
Release
Modification
12.1(3)XS
This command was introduced.
Command
Description
snmp-server enable traps
cdma
cdma
Specifies the community access string to permit access to the SNMP
protocol.
protocol.
show cdma pdsn
Displays the current status and configuration of the PDSN gateway.