Cisco Cisco IOS Software Release 12.4(2)XB6 テクニカルリファレンス
-25
Cisco Broadband Wireless Gateway 1.4 Command Reference, IOS Release 12.4(15)XL5
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.4 Command Reference, IOS Release 12.4(15)XL5
cs-type
cs-type
To specify the cs-type profile under the corresponding direction, use the cs-type sub command. The no
version of the command removes the cs-type information from the corresponding direction. Configuring
the command opens a sub configuration mode to configure various cs-type commands.
version of the command removes the cs-type information from the corresponding direction. Configuring
the command opens a sub configuration mode to configure various cs-type commands.
cs-type {ethernet-cs | ip-cs}
no cs-type {ethernet-cs | ip-cs}
Syntax Description
Defaults
There are no default values.
Command Modes
Service flow direction configuration submode.
Command History
Usage Guidelines
Configuring the command opens a sub configuration mode to configure various cs-type commands.
Examples
The following example configures both cs-types:
wimax agw service-flow profile isf
direction downlink
cs-type ip-cs
pak-classify-rule isf-classifier-downlink
precedence 1
cs-type ethernet-cs
pak-classify-rule isf-classifier-downlink
precedence 2
qos-info isf-qos-downlink
!
direction uplink
cs-type ip-cs
pak-classify-rule isf-classifier-uplink
precedence 1
cs-type ethernet-cs
pak-classify-rule isf-classifier-uplink
precedence 2
vlan 2 vrf vrf_1
vlan range 3 10 vrf vrf_2
vrf-default vrf_1
qos-info isf-qos-uplink
ethernet-cs
Specifies ethernet as the convergence sublayer.
ip-cs
Specifies IP as the convergence sublayer.
Release
Modification
12.4(15)XL1
This command was introduced.