Cisco Cisco IOS Software Release 12.4(2)XB6
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
Configuring ADSL2/2+ Annex M and Routed
Bridge Encapsulation over VC Bundles
Bridge Encapsulation over VC Bundles
This document describes the asymmetric digital subscriber line (ADSL) 2/2+ Annex M (product name:
HWIC-1ADSL-M) feature in Cisco IOS Release 12.4(11)XJ. This feature provides enhanced
functionality by increasing upstream data rates.
HWIC-1ADSL-M) feature in Cisco IOS Release 12.4(11)XJ. This feature provides enhanced
functionality by increasing upstream data rates.
The Routed Bridge Encapsulation (RBE) over the Virtual Circuit (VC) Bundle feature is an existing
feature, previously available on the Cisco IOS 12.4 (4)T release, that is now implemented on the
Cisco 800 through 3800 platforms with the Cisco IOS 12.4(11)XJ release.
feature, previously available on the Cisco IOS 12.4 (4)T release, that is now implemented on the
Cisco 800 through 3800 platforms with the Cisco IOS 12.4(11)XJ release.
Two additional software features in this release are impulse noise protection (INP) and an enhancement
to the DSL enable-training-log command. INP reduces the number of errors caused by impulse noise.
No configuration is needed for the improved INP. The DSL enable-training-log command has been
enhanced with an option to specify when to capture a log file. This allows the command to log the
firmware debug messages.
to the DSL enable-training-log command. INP reduces the number of errors caused by impulse noise.
No configuration is needed for the improved INP. The DSL enable-training-log command has been
enhanced with an option to specify when to capture a log file. This allows the command to log the
firmware debug messages.
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module. To reach
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
”.
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at
support. Access Cisco Feature Navigator at
. An account on Cisco.com is not
required.