Cisco Cisco Security Manager 4.0 トラブルシューティングガイド
CSM 3.x: Set Up User Permission and Roles
Document ID: 91762
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Set Up User Permissions
Security Manager Permissions
View Permissions
Modify Permissions
Assign Permissions
Approve Permissions
Understanding CiscoWorks Roles
CiscoWorks Common Services Default Roles
Assigning Roles to Users in CiscoWorks Common Services
Understanding Cisco Secure ACS Roles
Cisco Secure ACS Default Roles
Customizing Cisco Secure ACS Roles
Default Associations Between Permissions and Roles in Security Manager
Related Information
Prerequisites
Requirements
Components Used
Conventions
Set Up User Permissions
Security Manager Permissions
View Permissions
Modify Permissions
Assign Permissions
Approve Permissions
Understanding CiscoWorks Roles
CiscoWorks Common Services Default Roles
Assigning Roles to Users in CiscoWorks Common Services
Understanding Cisco Secure ACS Roles
Cisco Secure ACS Default Roles
Customizing Cisco Secure ACS Roles
Default Associations Between Permissions and Roles in Security Manager
Related Information
Introduction
This document describes how to set up the permissions and roles to the users in the Cisco Security Manager
(CSM).
(CSM).
Prerequisites
Requirements
This document assumes that the CSM is installed and works properly.
Components Used
The information in this document is based on the CSM 3.1.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.